Questioni have a 99 chev Malibu i installed a polar start, PS-3015 sh and dei 555l passlock by pass module i can get the car to remotely start with the key in the ignition on acc.
didn't hook up bulb check wire (for passlock 1) or the starter input(-) wire the instructions say i dont need my question is there some thing I'm missing or do i need to hook that starter input up and if so do i install a relay to reverse polarity on starter wire or is there somewhere i can get a ground signal
AnswerNo sorry I don't have info on the module you are using.
I refer these folks to either my forum
at www.installsupport.com or, I even have a
couple of guys at sales@tampacaralarms.com or,
ctursi@optonline.net , who might be able
to offer some insight.
Both good guys and they will treat
you right.
ALARMTEK
CARALARMMAN.COM
