Car Alarms: gmc car alarm, steering colum, passlock bypass

Question
i changed my heater core last nght for 3rd time and theres a box under neith my steering colum and tiny wires and little white conectors that go in it and one i beleave goes to the alarm starter that runs up side of my window to a sensor. well i guess i riped it and now wondering if thats why truck wont stay running. turns but wont catch. thank u if you can help. frustrated, been doing alot work my self and need my truck. 1999 gmc jimmy

Answer
This vehicle has a the PASSLOCK II key
based engine disabling system.

A bypass is required to circumvent.
If left unchecked, it will lock down the fuel injector
rail, and you will need to tow it in to GM for
evaluation, and resetting.

I suggest the PLJX bypass kit to get around
this issue.

This Passlock Bypass Module is designed to momentarilly
allow the engine to remote start by sending a proper
coded pulse to open the fuel rail passlock injector
cut off circuit.

The output from an alarm/remote starter
would then shut down the pulse, once it has detected
the engine has engaged, and preserve the integrity
of the passlock system.

See www.passlock2.com for a wiring solution.

Good Luck.

ALARMTEK