Car Alarms: diabling my car alarm, eagle car alarm, dash area

Question
I bought my car a yr ago it came with a black eagle car alarm that has a remote that never worked. Today i went to open my doors and somehow the alarm is activated and wont turn off. i repalced the battery in the remote but that still wont turn it off. it has disable the starter. I need to know how to disable the system so i can start my car, i want the system totally disconnected. can you help me?

Answer
You'll need to set off the alarm for a few seconds.
Then, look under the dash area for a button or, a toggle
switch. When you locate it, turn on the ignition
key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.

At this point. the alarm would have reset.
If this had a starter kill relay installed,
it would now be opened, and the engine would
turn over when tried.

You would repeat these steps to go back to
user mode to see if this was corrected.

But if it does work, I'd keep it this way, and
replace the alarm asap with one you know and
understand how it operates for the best overall
experience.

Let me know if it works for yours.

ALARMTEK
INSTALLSUPPORT.COM