Car Alarms: Karr 4040, resident technicians, karr security


Question
I have a 2002 Explorer XLT with keyless entry (4 button fob)and a Karr 4040 without any documentation. On the dash is the red security light that I assume is the factory unit. Under the wheel is small box with an led on one side and push-button on the back. This unit is connected to the Karr 4040 unit. When the car is locked the blue Karr led flashes for a time then stops. (the red led on the dash continues to flash at about 1 second rate).
Questions are: 1-What is the significance of the blue Karr led, and the button on the back of it. 2-How does the Karr system interact with the factory unit?
searching the Karr security site was not very helpful. Thank you for your assistance.


Answer
I don't know they're products so I can't help
there either.

On this one, the best thing here is
to go to my installers forum at
www.installsupport.com and see if
my resident technicians there can assist
with this project.

I unfortunately don't know the
system you are working with to advise
you properly on it's functions,
features or trouble shooting
information. Better to check with a tech
that might.

Good luck there.

ALARMTEK
CARALARMMAN.COM