Question i have installed a engine in a 1995 buick riveara and now the remote start wont work. i have reprogrammed the system and the lock and unlock system works. when i hold the button down for remote start the lights blink twice but the vehical will not start.
AnswerThis vehicle has a the Original VATS key
based engine disabling system. Without
bypassing it, you will not be able to do remote
start.
I suggest the PLJX bypass kit to get around
this issue.
This Passlock Bypass Module is designed to momentarilly
allow the engine to remote start by sending a proper
coded pulse to open the fuel rail passlock injector
cut off circuit.
The output from an alarm/remote starter
would then shut down the pulse, once it has detected
the engine has engaged, and preserve the integrity
of the VATS/passlock system.
Also, this is a self learning, resistor sensing
and adjusting module. Once the VATS wires have been tapped,
you would press the program button to learn,
and it does. The car should then allow start
with any hardware store key, and will remote
start without any fuss.
Regards,
Robert Martin-ALARMTEK/CEO
Master Technician
Mobile Security Electronics
www.PASSLOCK2.com
See What's On Sale This Week!
www.SHOP4KEYLESSENTRY.com
www.SHOP4CARALARMS.com
www.SHOP4REMOTESTART.com
www.PAGINGALARMS.com
www.PAGINGALARM.com
www.VISIONGUARD8000.com
www.GPSONTHENET.com
