Car Alarms: Acura Integra alarm, valet mode, acura integra

Question
QUESTION: Recently purchased an Acura Integra 1991 & the alram won't quit. Looks like a factory installed model, (no toggles or switches under the dash. Please help...driving me crazy

ANSWER: Dear Ms. C,
  Please describe what your are hearing and seeing
when the alarm is triggered, as
this car could have both an after market alarm
and a factory one as well.

Thanks.

ALARMTEK

---------- FOLLOW-UP ----------

QUESTION: Thanks for your quick response.
All the alarm sounds, sirens, loud, shrieking, then horn etc. I think it's a factory alarm. No warnings on the dash.
Would not deactivate with key in door or ignition. I disconnected the battery to make it shut up.

Answer
It's an after market system from your description.
Probably dealership installed when
it was purchased originaly.

To disarm it, try to locate and use the
valet/overide switch.

To start, look under the dash area for a button or,
a toggle switch. When you locate it, turn on the
ignition key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.=VALET/OVERIDE

This stops the alarm except for the keyless
entry if installed. The next step is to
either remove the alarm or, try to identify,
and get new remotes for it.

But once in Valet mode, it will allow the car
to start and operate like there was no alarm at all.

Let me know how it goes.

ALARMTEK
CARALARMMAN.COM