Car Alarms: car alarm on 93 Toyota Camry, car alarm system, valet mode

Question
How do I completely disengage or disconnect the car alarm system.  I tried to turn the toggle switch and disconnect the battery, but when it is reconnected, the alarm still goes on.  Help!!  I need the car for commuting.

Answer
It's an after market system from your description.

To simply disarm it, locate and use the
valet/overide switch.

To start, look under the dash area for a button or,
a toggle switch. When you locate it, turn on the
ignition key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.=VALET/OVERIDE

This stops the alarm except for the keyless
entry if installed. The next step is to
either remove the alarm or, try to identify,
and get new remotes for it.

But once in Valet mode, it will allow the car
to start and operate like there was no alarm at all.

Let me know how it goes.

ALARMTEK
CARALARMMAN.COM