Car Alarms: Shutting my alarm system off, gmc yukon, dash area

Question
I have 94 gmc yukon 2dr and I just want to know how to shut my alarm system off I think i have to start it and lock and unlock the door but im not sure your help would be greatly appreciated

Answer
It's an aftermarket system sir.

Look under the dash area for a button or, a toggle
switch. When you locate it, turn on the ignition
key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.

At this point. the alarm would have reset.
If this had a starter kill relay installed,
it would now be opened, and the engine would
turn over when tried.

You would repeat these steps to go back to
user mode to see if this was corrected.

Let me know if it works for yours.

ALARMTEK
INSTALLSUPPORT.COM