Car Alarms: Camry/Code Alarm Elite DM 1500, inline fuse, butt connector

Question
I'm back again. After halfway disassembling the dash, I've come to the conclusion that there is no valet button under there. I pulled the LED out of the dash...It's strictly a light. All wires coming from the "Brain" all just lead to factory wiring other than those going to the motion sensor. I found the inline fuse and the power lead to the brain. What would happen if I were to pull one of those? Could I just cut the siren lead? My daughter has the keys at work right now so I am unable to check. ....Desperate.

Answer
Don,
   Unplug the code alarm completely. Just take out the
plugs from the brain.

There is a relay inline on the starter wire
(BLACK/WHITE in the ignition harness off the key switch)
that is keeping the starter from engaging.

If unplugging the alarm does not allow the key to start it,
Then cut out the starter kill relay and socket inline,
and re-attatche the 2 free ends of that wire back together
with a yellow butt connector.

Then it will start every time.

If the car has keyless entry using the remote, this
feature will sadly end as well.

A.