Questioni am hoping you can provide with the information i need to program the impact sensor. the sensor needs to be turned up. thanx for your time
AnswerI don't supply alarm manuals, but on this one,
try to locate the
shock sensor under the dash. Once done, using
a small flathead screwdriver, look at the front of the
sensor, and turn the inset wheel counter clockwise
to lower sensitivity, clockwise for higher, checking
each level by arming the alarm, and wraping on the
car body each time to set it to the desired level.
You can also try my forum at www.installsupport.com
if you want a second opinion.
Good luck.
ALARMTEK
CARALARMMAN.com
