Car Alarms: viper 671xv question, valet mode, dash area

Question
my alarm will no longer chirp when arming or disarming doors lock and unlock and lights flash but thats it. also blue light stays lit all the time. whats my problem???
Thank you for your time,
jonathan

Answer
Should be no problem really.
It appears from your expaination, that the
car alarm is in service mode.

Ok, try this.
Put the key in the ignition, and turn forward
all the way just before cranking. Then within
5 seconds, press and hold in the valet/overide
button, found under the dash area,
until the installed LED (the blinking light)
in your dash area goes off, and the siren chirps twice.
(Your valet switch might be the toggle (on/off) type.
in this case, key on, flip switch in oposite direction,
key off.)

This should reset the alarm.

Just Repeat these steps to place it
back to valet mode.

That should do it.

ALARMTEK
CARALARMMAN.com