Car Alarms: remote not working, coral gables florida, dash area

Question
I have a 1995 camery with an automate alarm. got an extra remote from remoteunlimited. tryed to program using the instructions provided and did not work. gave up and continued to use the one remote I had. now the one remote I have stopped working. Battery in remote new. Is their a way I can disable the alarm so I can start and drive the car, or can you recomend someone to look at it. i'm at the university of miami in coral gables florida. thanks jeff

Answer
Look under the dash area for a button or, a toggle
switch. When you locate it, turn on the ignition
key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.

This solves the problem for now.

Then if you want to remove it, take it to a local
after market alarm dealer and have it done there.

They may even be able to reset/reprog. the features on
the alarm you have, to allow you to use the system
more comfortably, but of course, your call.

Have a nice afternoon.

ALARMTEK
INSTALLSUPPORT.COM