QuestionHi, I saw that someone else asked a similar question, but did not reply to your question for more info. I am trying to recharge a dead battery in my Pathfinder, but the alarm will not turn off. It is a stock alarm and I have no remote or anything. I would greatly appreciate any help. Thanks so much!
AnswerOk, normally, you would insert the key in
the drivers door, turn left, then right
to disarm and reset it. If yours is malfunctioning,
you can disable it for good by doing the following:
The FACTORY ALARM DISARM WIRE IS
light green |-| at the keyless entry module,
located under drivers side of dash.
Once Located, splice into this wire with
a simular guage wire, and put it to
a solid chassis ground. This terminates
the alarm functions entirely.
However, at this point, this car would be exceedingly
easy to steel, so I suggest you get an aftermarket
alarm system to protect it from here on in.
Have a good day.
ALARMTEK
CARALARMSTORE.com
