Car Alarms: 1995 f150 alarm removal, paylink, abs light

Question
how do i remove the alarm system(factory)on my f150?
to start the engine i must push the button under the dash while turning the key.
i may have an electrical problem as the abs light is flashing and when i press the brake pedal i cannot put the truck in gear.
i think the two problems may be inter-connected.
please advise!
thanks,tommy

Answer
To retrofit this alarm system
I suggest you get the wiring chart
for the vehicle, locate, and remove
each wire, one by one until extracted.

This File Is Available.

I have Checked My Databases &
This Wire Color/Location/Polarity Data Chart
Is Available To Purchase For Only $4.99.

I Do These Requests By Hand, So I Assure
You That I sent This Letter Myself.
It Is Not An Automated Response.

If You Are Ready To Buy It Using PAYPAL
Or, if Using Your Credit Card, Go To
www.MYWIRES.com and click on the paylink
there.

Once Your Payment Is Received, I Will Compile
The Wiring Data You Require To Install Your Aftermarket
Car Alarm, Keyless Entry, And Remote Starter System,
With Relay Applications Included, And Send Back The
Data In An Email To Print Out
To Use To Help Your Installation Project.

Thank You For Your Interest In My
Wiring Chart Services

See What's On Sale This Week!

www.SHOP4KEYLESSENTRY.com
www.SHOP4CARALARMS.com
www.SHOP4REMOTESTART.com
www.HONDASECURITY.com
www.VISIONGUARD8000.com
www.PAGINGALARMS.com
www.12VOLTPLANET.com