Car Alarms: TRANSPONDER ALARM KEYS FOR 2001 WINDSTAR, hot glue, key cylinder

Question
IS THERE A WAY TO DISABLE ALARM SO I CAN BUY REGULAR REPLACEMENT KEYS TO RUN CAR, BOUGHT USED & RECEIVED ONLY 1 KEY FOR 4 DRIVERS, QUITE A PAIN!!

Answer
There is a way.
You make the ignition code reader think the smart
key is in the ignition at all times.
This keeps the system from arming.

To make it happen, print the following
and give it to your technician:

Go get 2 non transponder keys cut at
the hardware store for 3 bucks each.  
Get a universal bypass module (key-in-a-box style)
at www.REMOTESTARTCENTRAL.com for 25.00.

Then wrap the coil around the key cylinder,
secured in place with hot-glue. Connect the
status input wire to chassis ground and the
positive to ignition...no more transponder
key required. No Smart Key security issues.

The total cost on this is
substantially less than what a dealership
would charge to replace and reprogram keys
all the time.

This is what will work instead of the dealerships
profit margin.

Tell them to overcharge someone else!

ALARMTEK
ALARMTEK.net