Car Alarms: 95 ford probe alarm, fuse box, car wont start

Question
can you tell me where or what the alarm looks like? my car wont start
and I dont have remote. I was told that this model of probe has
immobiliser problems.

Answer
Normally, you would insert the key in
the drivers door, turn left, then right
to disarm and reset it. If yours is malfunctioning,
you can disable it for good by doing the following:

The FACTORY ALARM DISARM WIRE IS
yellow/red |-| gray plug behind the fuse
box.

Once Located, splice into this wire with
a simular guage wire, and put it to
a solid chassis ground. This terminates
the alarm functions entirely.

However, at this point, this car would
be exceedingly easy to steel, so I suggest
you get an aftermarket alarm system to protect
it from here on in.

Have a good eve.

ALARMTEK
CARALARMSTORE.com