Car Alarms: door lock/unlock wires, alarmtek, wire colors

Question
Attempting to install a Astra 20 Factory Keyless Entry Upgrade Security System on a 2006 F150, wiring details say door lock is pink/yellow and unlock is pink/lt. green on the green plug in drivers kick panel, both these have constand negative 12v and state does not change when locking or unlocking the door are these the coorect wires?

Answer
ACCORDING TO THE 06 F150 NOTES I HAVE,
THE WIRES NEEDED ARE AT THE
BCM MODULE BEHIND THE TRIM IN THE REAR OF CAB ON
DRIVERS SIDE. THEY ARE NEGATIVE LOCKS AND
TO TEST, TAKE A SIMPLE TEST LIGHT HERE,
(NOT A MULTIMETER) AND SEND A GROUND PULSE
TO EITHER WIRE. YOU WILL GET THE PHYSICAL
REACTION OF LOCK/UNLOCK, DEPENDING ON THE
WIRE PROBED/GROUNDED. THEN ATTATCH ACCORDINGLY.

THE WIRE COLORS ARE CORRECT.

ALARMTEK