QuestionI have the key to the car but have misplaced the clicker or remote.
How can I shut down the alarm and get the car to start. Just useing the key. I don't want to alarm to self activate
AnswerSure, let's put it into valet/service mode.
Look under the dash area for a button or, a toggle
switch. When you locate it, turn on the ignition
key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.
This solves the problem for now.
Then if you want to remove it, take it to a local
after market alarm dealer and have it done there.
They may even be able to reset/reprog. the features on
the alarm you have, to allow you to use the system
more comfortably, but of course, your call.
Have a nice afternoon.
Robert Martin
ALARMTEK.
