Car Alarms: alarm, nissan altima, altima

Question
I have a 1997 Nissan Altima and I need to know how to disconnect the factory alarm

Answer
Like most factory alarms of the time,
you would normally, you would insert the key in
the drivers door, turn left, then right
to disarm and reset it. If yours is malfunctioning,
you can disable it for good by doing the following:

The FACTORY ALARM DISARM WIRE IS
green/yellow|- | harness from the drivers door.
Once Located, splice into this wire with
a simular guage wire, and put it to
a solid chassis ground. This terminates
the alarm functions entirely.

However, at this point, this car would be exceedingly
easy to steel, so I suggest you get an aftermarket
alarm system to protect it from here on in.

Have a good day.

ALARMTEK
CARALARMSTORE.com