Car Alarms: car randomly going off, bcm, alarm system

Question
i have a 2001 chevy s10 extreme. It randomly starts honking and flashing it's headlights is here a way to override this.

Answer
Normally, you would insert the key in
the drivers door, turn left, then right
to disarm and reset it. If yours is malfunctioning,
you can disable it for good by doing the following:

The FACTORY ALARM DISARM WIRE IS
lt.green |- | found in the drivers kick
Also found in the purple plug of the BCM.
The BCM is located behind the drivers side of the dash.  
The plugs on the BCM face towards the rear of the vehicle.

Once Located, splice into this wire with
a simular guage wire, and put it to
a solid chassis ground. This terminates
the alarm functions entirely.

However, at this point, this car would be exceedingly
easy to steel, so I suggest you get an aftermarket
alarm system to protect it from here on in.

Have a good day.

ALARMTEK
CARALARMSTORE.com