Car Alarms: Clifford remote Keyless entry system, exact model number, keyless entry system

Question
QUESTION: Aquired this 1994 unit, it's brand new in the box with a remote but no installation manual or instructions at all. I'm trying to find the installation manual/paper for this unit. This unit is just a remote entry with starter disable and park lights flashes. There are four relays on the circuit board and I've traced out some of the relays, but no idea what each relay could be used for. Any help would be greatly appreciated. Thanks Al
ANSWER: What is the exact model number of the system, this may assist in trying to find an installation manual.  Clifford's website does not list a 'remote Keyless entry system', it only lists model numbers.

---------- FOLLOW-UP ----------

QUESTION: On the back of the unit are two stickers on says QLC1104G6FA and under that is 60-131 then CLIFFORD. The second sticker says, AP1886FA under that is 50-131. There are no other stickers other than the FCC ID: I5MRX2. On the front it says "CLIFFORD" and "Remote Keyless Entry System". The box is a typical Clifford 3 1/2 X 6 inch with the a rounded bump just off center and four zip tie slots for anchoring it down. A white antenna wire protrudes out of the one end with a 24 pin locking pin harness on one side of that partial round bump.  

Answer
From what I can come up with that is indeed the older Clifford product, prior to being purchased by DEI.  That means there are no manuals available from the manufacturer.  The only suggestion I would have is to find a Clifford dealer and see if they may have a manual for that system laying around (or the old Clifford reference books).  You can trace each relay and assuming the starter kill is on board the relays would be for: parking lights (1), starter kill (1), and door locks (2).  Unfortunately I think you may be better off just picking up a replacement keyless entry system.  You can get one for $50 or less that will include 2 remotes, internal relays, starter kill, etc and will come with a warranty.  You can also try posting this question to www.the12volt.com/installbay and see if anyone there may be able to identify it, and provide you with a manual.