Car Alarms: Scytek 4000rs, yukon xl, body control module

Question
can't get the parking lights to flash when system arms/ disarms. I have tried the wiring diagrams in The12volt.com, but nothing works. The headlights do turn on when I use the Remote start feature though. Can you help me with this. By the way the Vehicle is a 2001 Yukon XL.

thanks,
John

Answer
Should not turn on the HEADLIGHTS at all.
The white wire on the 4000 (fused)
should go to a BROWN wire in the light blue
plug at the Body Control Module.

The BCM is located behind the drivers side
of the dash.  The plugs on the BCM face
towards the rear of the vehicle. The parking
lights are in pin A5 and the headlights are
in pin A11. Take off the wire it's attatched
to now, and go here. There is not enough
punch of the flashing light circuit to do the
headlight without damaging the remote starter.

Good luck.

ALARMTEK