Car Alarms: alarm sounds for no reason, side kick panel, 300zx

Question
I have a 1990 300zx 2+2 that's all stock, including the car alarm which will randomly goes off. I want to know how I can disable it until I can put in an aftermarket alarm so my neighbors will stop complaining about the alarm. I can't find a manual for my car that shows me where a fuse supplying power to the alarm is located. Could you help me out?

Answer
Normally, you would insert the key in
the drivers door, turn left, then right
to disarm and reset it. If yours is malfunctioning,
you can disable it for good by doing the following:

The FACTORY ALARM DISARM WIRE IS
GRAY/RED (-negative wire) in the
DRIVERS SIDE KICK PANEL.

Once Located, splice into this wire with
a simular guage wire, and put it to
a solid chassis ground. This terminates
the alarm functions entirely.

However, at this point, this car would be exceedingly
easy to steel, so I suggest you get an aftermarket
alarm system to protect it from here on in.

Have a good day.

ALARMTEK
CARALARMSTORE.com