Car Alarms: diaarm 1991 Jeep Laredo Security System, jeep laredo, security light

Question
I need to know instructions to disarm 1991 Jeep Laredo factory installed security system as Headlights flashing, car horn honking and a worded SECURITY" light in the dash flashing?  Thanks


Answer
Okee Dokee,
   Normally, you would insert the key in
the drivers door, turn left, then right
to disarm and reset it. If yours is malfunctioning,
you can disable it for good by doing the following:

The FACTORY ALARM DISARM WIRE IS
green/orange, |- negative wire |,
located in the driver's kick panel.

Once Located, splice into this wire with
a simular guage wire, and put it to
a solid chassis ground. This terminates
the alarm functions entirely.

However, at this point, this car would be exceedingly
easy to steel, so I suggest you get an aftermarket
alarm system to protect it from here on in.

Have a good day.

ALARMTEK
CARALARMSTORE.com