Car Alarms: 2000 taurus, general electronics, pin plug

Question
QUESTION: my factory anti-theft light blinks fast like it was triggered.  it will not allow the
engine to turn over.  battery is fine.  i tried disconnecting battery and tried
enabling with remote and disabling.  no matter what i do when the key is turned
to the on position theft light blinks fast.  how do i reset please?
ANSWER: Does the "anti-theft light" say that? Or is
is a blinking, single LED in the dash?

Let me know.

ALARMTEK

---------- FOLLOW-UP ----------

QUESTION: it's a single word "theft" that is blinking

Answer
Normally, you would insert the key in
the drivers door, turn left, then right
to disarm and reset it. If yours is malfunctioning,
you can disable it for good by doing the following:

The FACTORY ALARM DISARM WIRE IS
pink/white |- negative| in the 26 pin plug at GEM
(GENERAL ELECTRONICS MODULE)
to the left of the steering column
under the dash.

Once Located, splice into either wire with
a simular guage wire, and put it to
a solid chassis ground. This terminates
the alarm functions entirely.

However, at this point, this car would be exceedingly
easy to steel, so I suggest you get an aftermarket
alarm system to protect it from here on in.

Have a good day.

ALARMTEK
CARALARMSTORE.com