Car Alarms: how to de-activate the passive arming, fcc id, alarm manufacturer

Question
Hello sir... sir i have a problem wid ma car alarm.how can i de-activate the self arming process of my security car alarm. it really pissing me off.u know wot if it happened yesterday when i parked ma car on gas station and close all the door of my car with the (key) inside the car.and shut th door and step away from the vehicle and fillin the gas then suddenly after 30 seconds the car passive arming system arms the security alram and shut down all the doors with the (key) inside.then as the car is being all closed then sir tell me how can i open the door and get inside with the key locked inside.dat "auto rearming" feature of modern car alarms suxxxx .dats y kindly tell me sir how to de-activate that "auto rearming" feature of ma car alarm.so incase when i place ma car keys inside the alarm should'nt automatically locks all the doors and put me in sufferable condition. thnks ....

Answer
There are usually 2 modes, passive and active.

In most alarms, there is either a dip switch,
a control tab, or programing switch and
a procedure to toggle back and forth between
the 2 modes. Not knowing the alarm you have
makes this difficult as you MUST have the
method followed exactly as the install manual
states, or you can not make any changes as to how
it operates. I suggest either trying to identify
the system, then contacting the manufacturer
for the manual if you don't have it, or removing
the system and replacing it with one you can control
and does what you want and when.

Makes sense right?

I hope you can locate the alarm manufacturer
to help with this. Also you can try
www.REMOTESUNLIMITED.com to see if you can
identify the alarm using the remotes FCC. ID.#
on the back.

Good luck with it.

ALARMTEK
SHOP4CARALARMS.com