Car Alarms: 76 Jeep Viper 5900SST, alarmtek, 508d

Question
I recently bought a Viper 5900SST to install as a DIY project.  I chose the alarm for the distance.  This is my first alarm system and am curious if about how to not have the remote start and keyless entry hooked up.  I do not need these features and only need a security alarm.  I also bought the 508D Invisabeam sensory shield.  Will the alarm function without the rmote start and keyless entry features hooked up? Do I need to do anything special to make it work on my vehicle?

Answer
No sounds like you are all set. As you can probably
figure out there will not be a wire chart on a 76
vehicle, but I think you should do ok.

Just follow the included install instruction
and test all of the wiring you will need in the
Jeep prior to connections.

I don't provide Viper customer install support here
at ALARMTEK, but from your description,
It'll be just fine.

Good luck with the project.

Happy Thanksgiving.

ALARMTEK
USCARALARMS.com