Car Alarms: door locks, power door locks, predator 3001

Question
I added power door locks to my old truck but can't find where to hook up the wires to run the remote. The locks looking for a neg for the lock and unlock. The alarm on the truck is a Predator 3001 which i guess they don't make anymore. I've tried checking wires while pressing the alarm button but can't seem to get a signal to run the locks. I don't have any info on the alarm and can't find any. Any help would be nice. thanks

Answer
I Don't know the alarm unfortunately.

There may be a plug that has the wires
for lock and unlock that you are not seeing,
or was never installed/used.

I wish I had more to go on, but at this
point, without the schematic, I would not
have a solution unless I bench tested
it to see what wire did what.

Best suggestion though, is to not try to save some
dollars here and install an unknown system
to protect this vehicle. Not knowing
what it can do, might be hazardous.

Get a fresh start,
spend 60. or so and get something you
can work with, and has a warranty.

Will make for a better experience.

Good luck on this one.

ALARMTEK
USCARALARMS.com