Car Alarms: car alarm/keyless entry, car alarm system, car man

Question
I have a problem with my keyless entry/car alarm system. I have the system that locks the car automatically after 10 seconds. And if i don't open the car with the Remote and use the Key, the system ticks and ticks, usually until i find the remote and click it. But now the remote does nothing and the car ticks all the time until the battery dies. Or until i remove the system.

i tried reseting it but it still ticks and the car clock dims/gets bright in sync with the ticking. It used to do that if i use the key to get in the car until i press the remote once. but now the remote doesnt work. but the battery is fine. could the unit have an error or is it broken? i hope not..... the unit is called: Thunder AT-2000

Thank You

Answer
Sounds like the alarm is in armed mode,
and the siren has been eliminated.
Remove this Andrew. Cut it out
of the car man now.

Not worth trying to figure it out.

If you know how, great. If not, I suggest getting
the wiring for the vehicle at
www.MYWIRES.com and go in there,
take it out and then put in something more appropriate,
that has a full warranty and support service
for it.

Won't be hard to re do it with a new
one since you will know which wire is which at that
point. But trying to salvage yours seems
a bad idea since it's clearly
malfunctioning.

Let me know if I can outfit you with a system
that suits your needs.

ALARMTEK
www.CARALARMz.com