Car Alarms: Alarm system malfunction after the battery die, infinity g20, system malfunction

Question
Dear Sir:
I have a 93' Infinity G20. The battery in the car recently died and I replaced it. The car/electrical system works fine, but now the alarm system doesn't respond to the remote control,as well as the LED light is no longer blink.  Do I need to reprogram the remotes and change the battery or any other procedure to solve the problem?
Thanks.

Answer
You might need to reprogram the transmitters
depending on the system installed, but tell me,
is the LED light in the dash on solid? If it is
you are in Valet/Override mode.

There is a simple way to get around that, but if
the LED is not on solid, you may have popped the fuse
inline on the power lead when the battery was
re connected.

Have a tech go over it to be certain.

Let me know what the status is when you
get the chance to check on it.


Luck.

ALARMTEK