Car Alarms: Kia Van 2nd ignition relay, amp relays, automotive relay

Question
Van has 2 ignition wires remoter starter has 1 I know I need a relay.  I already have an automotive relay.  Just not sure how to connect it.  The relay has pins 30, 85,86,87 But what wires go where?  I am little afraid of connecting the wrong thing.  Thanks

Answer
The relay you need has 5 pins. Even if you do not
use them all, the 5 pin, double throw SDPT relay
set up as a positive 30 amp relay is
required to create the second
ignition output using the first ignition wire
as the input source.

This relay also must
be inline fused prior to connecting power at 10amps.

You should contact your alarm seller for detailed
instructions and support on this application
prior to attempting installation.
If you need 30 amp relays and sockets,
they can be purchased on my website at
www.12voltplanet.com

Good luck.

ALARMTEK