Car Alarms: I have the opportunity to..., buick redevous, passlock

Question
I have the opportunity to install a remote starter in a vehicle with a transponder but have never done one. Did some with the passlock but anyway my question is the key. How is it wrapped what size wire and how thight.Where do the ends of the wire go?   2001 or 2002 Buick Redevous
    Thanks

Answer
This vehicle has the passlock III system as you know
and there is no "wrap" that I am aware of that will
ALWAYS do the job. Inside the key is a pelet in
an oil base. Cutting it out in not advised.
The trick here, is to make the car think the key
is in the ignition. The way to do this is
have a 3rd key made, prior to installation so
you will have one to put into a module box.

Have a look at TRANSMOD BYPASS at my site
www.RELAYHELP.com .

That is the safest way to do it. Other then that,
"wraping" the key using just wire, and not resistors
would be pointless.

I hope this clears it up a bit.

ALARMTEK
PASSLOCKBYPASS.com