Car Alarms: Ignitionnn?, wire colors, ford probe

Question
Yes, this is the same answer I have gotten from other sites as well but for some reason in my car is not the case, unless of course I am looking in the wrong place. There are two main bundles of wire comeing from my ignition and none of them are black/yellow. Actualy, the site "bulldogsecurity.com" gives a list of all the wire colors for every car but my car does not match up (it also says a black/yellow wire would be my starter), rather than a blue/yellow accesory wire I have a solid blue and rather than a black/pink ignition I have a green. Is there some reason why my car would be diffrent?

-------------------------
Followup To
Question -
I am trying to install a remote starter in a 95 ford probe se and I cant seam to find the crank wire (I dont know if thats what its realy called, but the one that is ONLY on when the engine is turned as far as possible) I was hopeing you could help me figure out what color it is or where it might be located (Ive tried what I thought was every wire in the ignition harness but none seam to be it)
If you could help itd be great! I just sent out one of those wireing chart request things as well!
Answer -
It's a black/yellow wire in the ignition column.
For the rest of the notes however, I have
them at www.wirewerx.com.

Good luck with it.

ALARMTEK

Answer
It would be more then odd if yours
was the only different one
from all of the others.

You are looking for the wire off of
the ignition cylinder that shows 12 volts
ONLY when cranking over the engine.
It should be black/yellow. Has always
been that wire. If not this color, then
fing the one that shows 12 volts when
cranking, and nothing at all other times.

It's there, and I am betting you are
on the wrong wire pack. Go back in
and hunt it down.

Have a good night.

LARMTEK