Car Alarms: car alarm, mitsubishi galant, dash area

Question
I have purchased a 1995 Mitsubishi Galant.  It is equipped with an alarm that I don't care to have.  It constantly goes off and I get stranded because I am not able to start my car.  Can you tell me how I can get it uninstalled by myself.  I live on a fixed income and cannot afford to pay to have it taken off.  I sure would like your advice and will wait for a response.  Thank you from Texas.

Answer
Ok, try this.
Put the key in the ignition, and turn forward
all the way just before cranking. Then within
5 seconds, press and hold in the valet/overide
button, found under the dash area,
until the installed LED (the blinking light)
in your dash area comes on solid.
(Your valet switch might be the toggle (on/off) type.
in this case, key on, flip switch in oposite direction,
key off.)

This should be valet. This overides
the starter kill relay in the alarm harness,
and returns the car back to disarmed mode.

The only thing that will work now on your system,
is the keyless entry if installed.

Just Repeat these steps to rearm your system.

That should do it.
If you want to remove it at this point,
buy the wiring chart for the vehicle,
at www.wirewerx.com and reverse engineer
it wire by wire, until it's safely removed.

Let me know what happens.

ALARMTEK
STARTERDISABLE.com