Car Alarms: Question in KIA Alarm wiring, remote starter installation, kia sportage

Question
Hi there, my car is KIA Sportage, 97-yr. I want to change the alarm by DIY. I can locate the function for all wires except one(total 11 wires) - it is white/green wire and seems used to activate the ignition. A signal/voltage can measured when the key trun to 'ON' posistion. Interesting is that, I just connect 3 wires(+12V, ground & this wire) to the alarm and then disarm the system, I can start up the engine, after that I can remove those wires and the engine still keep running. I tried connect this wire to +12V & ground, but it doesn't help to start up the engine. So if I buy a new alarm, what I should connected to this wire? or may I have the wiring diagram?

Answer
This Wire Color/Location/Polarity
Data Chart Is Available From Our Database
for YOUR 12 Volt Security/remote start/
keyless entry Installation Project!

CLICK ON or, COPY/CUT N PASTE THE FOLLOWING
PAY LINK TO GET IT NOW:

https://www.paypal.com/xclick/business=installsupport%40aol.com&item_name=1+VEHICLE+WIRING+DATA+CHART&item_number=1+VEHICLE+WIRING+DATA+CHART&amount=3.99&no_note=1¤cy_code=USD

OR,

You Can Go Back To www.WIRINGCHARTS.com ,
And Send Us $3.99 To Aquire It.

As soon as I receive your payment,
I will forward your Vehicle Specific wiring
chart to your email address with all of the
colors, locations & polarities,  plus
many helpfull and applicable links for
relay diagrams, & more to complete your
Car Alarm, Keyless Entry & Remote Starter
installation project.

Thank You.
Robert Martin
Customer Support Services
The WIREWERX!
www.WIRINGCHARTS.com
www.CARALARMZ.com