Car Alarms: BMW viper car alarm, viper car alarm, viper car alarm system

Question
I purchased a used BMW, which did not come with a manuel.  It has a viper car alarm system.  When I get out of the car after about 20 seconds, all the car door lock and it will not start either.  How did I turn this feather off?  Also, do you know how I can get in touch with Viper car alarm?

Answer
Ok, try this.
Put the key in the ignition, and turn forward
all the way just before cranking. Then within
5 seconds, press and hold in the valet/overide
button, found under the dash area in most cases,
until the installed LED (the blinking light)
in your dash area comes on solid.
(Your valet switch might be the toggle (on/off) type.
in this case, key on, flip switch in oposite direction,
key off.)

This should be valet. This overides
the starter kill relay in the alarm harness,
and returns the car back to disarmed mode.

The only thing that will work now on your system,
is the keyless entry if installed.

Just Repeat these steps to rearm your system.

That should do it.
You can locate some information on the system
by going to the Viper website at www.directed.com

Good luck with that &
let me know what happens.

ALARMTEK
WIREWERX.com
CARALARMCITY.com