Car Alarms: alarm wont disarm, starter wire, ford probe

Question
We bought a 96 Ford Probe 1 week ago and after a week of everything  being fine, we tried to start it seems the battery died. After 3 tries to start the ignition, the alarm went off - and now we can't disarm it. We can't open the hood or doors or do anything without the alarm going off. We looked under the dash and in the left foot area and everywhere in the car but can't find any button or switches for the alarm. What should we try next?

Answer
Hmmm, well if no valet overide switch can be found,
then you will need to drop the panel under the steering
column, and locate the alarm brain. Once found,
unplug it. Then try to start the car. If no joy,
you will need to then remove the starter kill relay
installed on the starter wire, then re attatch the
starter wire to pre installation condition. Then you
can start the car.
Finally, you should reinstall a alarm/keyless system
you understand, and can rely on.

Good luck with it.

ALARMTEK
UScaralarms.com