Car Alarms: Using Valet Mode, valet mode, dash area

Question
Need to know How to Activate & Disable Valet Mode. Its a generic to button remote after market Alarm with Keyless entry  i think its an Accele Brand Security Alarm No Manual. Need Help Thanks in Advance.

Answer
Answer:  Ok, try this.
   Put the key in the ignition, and turn forward
all the way just before cranking. Then within
5 seconds, press and hold in the valet/overide
button, found under the dash area in most cases,
until the installed LED (the blinking light)
in your dash area comes on solid.
(Your valet switch might be the toggle (on/off) type.
in this case, key on, flip switch in oposite direction,
key off.)

This should be valet. This overides
the starter kill relay in the alarm harness,
and returns the car back to disarmed mode.

The only thing that will work now on your system,
is the keyless entry if installed.

Just Repeat these steps to rearm your system.

That should do it.

Let me know what happens.

ALARMTEK
AUTOPAGER.com