Car Alarms: car alarm, dash board, car alarm

Question
Hello,
 I have a problem with my car alarm.I replaced a bulb in my dash board and after that,starter kill alarm doesn't work.I already cheched all the fuses but still the same.I can still disarm and armed the alarm.As I said the only thing doesn't work is the starter kill alarm.
Please helpme with this.
Thank

Answer
Then you need to remove and check all the
connections & fuses on the aftermarket system.
Since I am not there to inspect,
you need to either remove and inspect the
"starter kill" device,
or be more elaborate in your explaination of
which wire is where, what it's for and what
it's doing. I am flying blind here.

Hard for me to tell what's wrong with your
system with only limited information.

ALARMTEK