Car Alarms: remote starter, chrysler intrepid, remote starter

Question
Iam installing a remote starter on a 1999 chrysler intrepid. 2.7 engine it has a coil on every spark plug. I can not find the [tach wire] to connect to. hope you can help thanks  

Answer
Ok, This vehicle has an ignition coil for each cylinder. For tach use a tan/stripe wire at any one of the coils.
Also keep in mind that if you have a GRAY ignition key,
you also will have to install a transmod bypass module
for remote start, and will have to give up a key to do it.

See transmod bypass module at www.relayhelp.com

Good luck with it.

ALARMTEK