Car Alarms: remote start not working right, nissan sentra, remote start

Question
-------------------------
Followup To
Question -
i have this ALPHAGUARD AG95 ALARM and everything is in working ok but the remote start is not working right.For some reason when i start it with the remote and in couple seconds it turns off itself. After that it starts on its own and it does that a few times and it stops. (on off on off)
could you please tell me what to do.
my car info
Nissan sentra gxe 2003

thanks for your time and cosideration,
romeo
Answer -
There are 3 things on this car that would hold you back.
1 ThE transmod in the ignition has to be bypassed,
or, you can't remote start the car. 2. you will need
to address All Ignitions (sounds like you may have missed 1)
and finally, this car has 2 starter wires. Both have
to be addressed for remote start or, nada!

Go back up in there and check all the connections,
and follow my advice to correct the situation.

Luck.

ALARMtek

how much is your bypassed module ship to hawaii?
do you need a specific type of module?

Answer
The modules are 25.00 + s&h to hawaii (9.99)
But let's do the other stuff first.
Do both starter wires, and both ignition wires
in the ignition column. Then go to the tach
under the hood, and go through the tach learning
procedure in your remote starter manual to "learn"
the tach rpm rate.

If all is right, it should start. If right and it
still gets the same reaction, then I will
be happy to sell you a transmod bypass to make it
work. But let's see if the fixes work before
you spend any money. Ok?

ALARMTEK