Car Alarms: shock sensors, shock sensors, alarmtek

Question
I recently installed an aftermarket car alarm. Were is the best place to place the shock senor. I also have an extra shock sensor i like to install on the alarm. But the only one wire for an extra sensor. Its blue. The extra sensor has 4 wires,(blue,red,black,white). how would i wire it.  I'm assuming that the blue goes to blue, red to 12v, black to ground. Were does the white wire go? thanks for the help

Answer
To get the second sensor to do what the first one does,
you need to parallel them. Go to my site at
www.relayhelp.com  and see the diagram for diode
isolating sensors. to get what I am talking
about. The blue wire you are talking
about is for the hood or trunk really, and if
you have a single stage sensor to hook up. This
does you no good on this one. Disregard.

Have a good one.

ALARMTEK
www.12VOLTINSTALLER.com