QuestionI recently purchased a dual stage microwave sensor; where should I mount it, what wire should I hook up the first stage and second wire to. I bought a FM-870 alarm to use with it... THANKS
AnswerI sent your question to the tech support staff
at Commando for they're answer, but they seem to be busy.
You would add the shock sensor trigger wires
(not sure but if you have a red and black wire, then
it's the other 2 wires -white and blue maybe?) that are
your 1st stage (warn away) and 2nd stage (instant alarm)
Mount this in the middle of the vehicle, facing straight
up getting a 180 degree coverage. If you want help
direct from Commando, call 1 800 780-1409 or write to sales@commandoalarms.com / ryan@slickcar.com
Good luck with it.
ALARMTEK
