Car Alarms: Disarm Ford Probe 1996 alarm, dash area, ford probe

Question
Hi,

I have a 1996 ford probe with a stock alarm installed.  The car will not start without the alarm being disabled right before starting, even if it was not enabled.  This however was not that big of a problem until neither of my keyless entry's would work.  They have new batteries but still nothing, now i can not start the car.  If there is a way to disable the alarm temporarily or perminately please tell.  Thank you greatly.

Answer
Ok, don't panic. Try this.
Look under the dash area, maybe to the left
foot area in the plastic, for a button/switch
that does not look like the OEM factory equipment.

Now put the key in the ignition, and turn forward
all the way just before cranking. Then within
5 seconds, press and hold in the button until
the installed LED (the blinking light)
in your dash area comes on solid.

This should be valet. This overides
the starter kill relay in the alarm harness,
and returns the car back to disarmed mode.

The only thing that will work now on your system,
is the keyless entry if installed.

Just Repeat these steps to rearm your system.

That should do it.

Let me know what happens.

ALARMTEK