Auto Racing: performance, jet performance chip, march underdrive pulleys

Question
I have a 93 mustang with a crate GT-40 5.0 with a e303 cam, 24 p injectors, bbk long tube headers, bbk ssi series intake, bbk 70mm throttle body, msd distributor, crane HI-6S ignition kit, taylor 10.4 "409" wires, jet performance chip, march underdrive pulleys, K & N cold air, and a 4.10 gear. My engine feels like it aint got all its power. I can only get 13.3 in quarter mile. Did i use the wrong setup in parts and what do you think i should run?

Answer
Kurt-

  I'd say a 13.3 is actually a pretty decent time considering the mods you have.  You didn't mention what kind of transmission you have so it might be just a bit slow if you have a manual.  My advice would be to find a shop in your area and have they put it on a dyno.  They can tune it to get the most from the combination and work out any bugs there might be.  Hope this helps.

Steve