GMC Repair: Gmc Yukon windshield wiper connector, gmc yukon, windshield wiper

Question
Hi, we have a 98 gmc yukon that has the familiar wiper issue, except that the issue is a loose connector between the motor to the electrical. The plastic end doesn't stay tight. Electrical tape is a temporary fix until the truck wiggles it loose. I'm not finding any instructions to install a new connector & I can't see where it leads at the other end. I can purchase one at the local parts store. Any suggestions would be great. Thanks

Answer
Hi
Which part is loose? The connector with the wires and terminals, or the wiper motor pulse board, where the wires plug into?
If the pulse board (Wiper module), it CAN be purchased at parts stores and is held on by 3 small T-15 torx or star screws. After removing screws, it just pulls out.
If the connector end, it would need to be purchased from a dealership (if still avalible) or maybe at a salvage or used parts yard.
I hope this helps