GMC Repair: 93 CHEVY FULL SIZE BLAZER, size blazer, filler neck

Question
TRYING TO REMOVE FUEL TANK TOOK 2 BOLTS OFF BUT IT WONT RELEASE WHY?

Answer
Hi
If it is a left side tank, you'll still have the fiiller neck and fuel lines and electrical connector.
Igf it a rear tank, make sure you dont have a tank sheild.
(It'll cover the entire tank....hard heavy metal plate)
If not, pretty much same, filler neck, lines and connector.
They will ocasionally "stick" to the insulating material on the body, but just a little pulling down on the tank will release it.
I Hope this helps.
Good luck
Pawl