Questionthanks ima look for it but all the wires are connected to that and i have to cut them and pass them to where the stereo is gonna go?
-------------------------------------------
The text above is a follow-up to ...
-----Question-----
i looked on top of the accelerator and all i see are lots of wires how do i noe which one is the tunner box because i dont want to unplug the wrong thing can u send me a picture or describe it please?thank you
-------------------------------------------
The text above is a follow-up to ...
-----Question-----
how do i remove the stereo in a 1991 chevy silverado 1500 it has the original stuff and i want to replace it with a new stereo?
-----Answer-----
you don't need to remove the stereo only the tape deck eq part
you also need a kit to install the new radio
under the dash by the acelarator pedal is the amplifier tunner box you need to unplug that all your power and speaker cables are there and they will reach to where the radio is going to install
also you can leave ignition and constant power there if you want to keep the factory clock working
good luck
-----Answer-----
rectangular silver or black box about 8x6x1.1/2 there is 3 plugs and 1 round plug that is the antenna
you have to pull the seat to the back and go on the floor look up under the dash and you will see it is been hold by 3 screws
good luck
here is the picture
http://i19.ebayimg.com/06/i/000/8e/f3/ef17_1.JPG
Answerthat is correct you have to cut all the wires or unplug them if you keep the yellow and orange there the cloock will keep working you also need a kit to install the new radio you can get that from oemautosound.com
and this next link is for the wire color codes
http://www.installdr.com/Harnesses/GM-Wiring.pdf
