Audio Systems: 2005 Ford Mustang stock headunit removal, phillips screws, ford mustang

Question
steps needed to remove factory radio.

Answer
STEP 1. Set parking brake and put gear shift into neutral.
Insert the dash trim removal tool behind a corner of the
gear shift bezel. Press down to release a retainer clip.
Work the tool around the bezel until completely released.
Lift over gear shift and set aside.

STEP 2. Open arm rest and remove two (2) Phillips screws
from either side of the hinge. Photo 1. Close arm rest and
lift the back end of it slightly. Slide arm rest away from
the dash.

STEP 3. Insert dash tool behind top of small trim piece
that is to the right of the radio. Photo 3. Press down to
release clip. Work tool downward and remove trim.
4 screws to remove radio after that...