Questionso far i can only find two speaker wire the right passenger one,, and i know the power, and ground, and memory, i need to know what color goes for which speakers.
AnswerI don't trust color codes. Even, sometimes, the manufacturer ran out of certain colors and the colors actually used differ from the publishe wiring diagram.
There is only one way to know for sure; trace it out with and ohmmeter and verify so that you know beyond any shadow of a doubt where that wire begins and where it ends.
It is easy to do with speaker wires because they are usually in pairs; short the speaker ends together and then put the ohmmeter on the radio end looking for the pair that show "0" resistance. And so on.
If there is a speaker connected already you can use a battery; touch the pair of speaker wires that you want to check to the + and - terminals of a battery (9v or 1.5v) and listen for a clicking sound coming from the speaker that those wires are connected to.
Good luck,
cleggsan
PS: If you do want to look up the wiring chart/color coding, you may find your vehicle (you didn't give it to me so I cannot look it up for you) if you go to installdr.com and see if you car is on the list. That will give you a start; then you can confirm them with testing as above.
